for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 4 4 - 40 hmc369lp3 / 369lp3e smt gaas hbt mmic x2 active frequency multiplier, 9.9 - 12.7 ghz output v04.0210 general description features functional diagram output power: +4 dbm sub-harmonic suppression: 30 dbc ssb phase noise: -142 dbc/hz single supply: 5v@ 46 ma 16 lead 3x3mm smt package: 9mm2 electrical speci cations, t a = +25 c, vcc= 5v typical applications active multiplier for x band applications: ? oc-192 clock recovery ? microwave radio & vsat ? military radios, radar & ecm ? test instrumentation the hmc369lp3 & HMC369LP3E are active miniature x2 frequency multipliers utilizing ingap gaas hbt technology in 3x3 mm leadless qfn surface mount packages. power output is +4 dbm typical from a single +5v supply and varies little vs. input power, temperature and supply voltage. suppression of undesired fundamental and sub-harmonics is 30 dbc typical with respect to output signal level. the low additive ssb phase noise of -142 dbc/hz at 100 khz offset helps the user maintain good system noise performance. the hmc369lp3(e) is ideal for use in lo multiplier chains allowing reduced parts count versus traditional approaches. the hmc- 369lp3(e) are also useful for oc-192 clock recovery. the application of 10 gbps data to the input gen- erates a -7 dbm clock tone at the output with spurious signals suppressed by 25 db. parameter min. typ. max. min. typ. max. units frequency range, input 4.95 - 5.3 5.3 - 6.35 ghz frequency range, output 9.9 - 10.6 10.6 - 12.7 ghz input power range -5 +5 -5 +5 dbm output power -1 3 0 4 dbm sub-harmonic suppression 30 30 dbc input return loss 17 16 db output return loss 5.5 6 db ssb phase noise (100 khz offset) pin= 0 dbm -142 -142 dbc/hz supply current (icc) 46 61 46 61 ma
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 4 4 - 41 output power vs. temperature @ 0 dbm drive level output power vs. supply voltage @ 0 dbm drive level output power vs. drive level input return loss vs. temperature output return loss vs. temperature -2 -1 0 1 2 3 4 5 6 7 8 9.5 10 10.5 11 11.5 12 12.5 13 +25 c +85 c -40 c output power (dbm) output frequency (ghz) -2 -1 0 1 2 3 4 5 6 7 8 9.5 10 10.5 11 11.5 12 12.5 13 -10 dbm -5 dbm 0 dbm +5 dbm output power (dbm) output frequency (ghz) -2 -1 0 1 2 3 4 5 6 7 8 9.5 10 10.5 11 11.5 12 12.5 13 vcc=4.5v vcc=5.0v vcc=5.5v output power (dbm) output frequency (ghz) -30 -25 -20 -15 -10 -5 0 3 3.5 4 4.5 5 5.5 6 6.5 7 +25 c +85 c -40 c return loss (db) frequency (ghz) -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 9.5 10 10.5 11 11.5 12 12.5 13 +25 c +85 c -40 c return loss (db) frequency (ghz) hmc369lp3 / 369lp3e smt gaas hbt mmic x2 active frequency multiplier, 9.9 - 12.7 ghz output v04.0210
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 4 4 - 42 output spectrum ssb phase noise performance, fout= 10.66 ghz, input power= 0 dbm -60 -50 -40 -30 -20 -10 0 10 0 2 4 6 8 10 12 14 16 18 20 22 24 26 output power (dbm) frequency (ghz) -160 -140 -120 -100 -80 -60 -40 -20 0 10 2 10 3 10 4 10 5 10 6 10 7 ssb phase noise (dbc/hz) offset frequency (hz) smt gaas hbt mmic x2 active frequency multiplier, 9.9 - 12.7 ghz output v04.0210 hmc369lp3 / 369lp3e
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 4 4 - 43 absolute maximum ratings outline drawing typical supply current vs. vcc vcc (v) icc (ma) 4.5 45 5.0 46 5.5 47 rf input (vcc = +5v) +20 dbm vcc +5.5v channel temperature 135 c continuous pdiss (t=85 c) (derate 6.8 mw/c above 85 c) 440 mw thermal resistance (r th ) (junction to ground paddle) 147.8 c/ w storage temperature -65 to +150 c operating temperature -40 to +85 c note: multiplier will operate over full voltage range shown above. electrostatic sensitive device observe handling precautions notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative. 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. part number package body material lead finish msl rating package marking [3] hmc369lp3 low stress injection molded plastic sn/pb solder msl1 [1] 369 xxxx HMC369LP3E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] 369 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information smt gaas hbt mmic x2 active frequency multiplier, 9.9 - 12.7 ghz output v04.0210 hmc369lp3 / 369lp3e
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 4 4 - 44 pin description pin number function description interface schematic 1, 2, 5 - 8, 11 - 13, 15, 16 n/c the pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/dc ground externally. 3rfin rf input needs to be dc blocked only if there is an external dc voltage applied to rfin. 4, 9 gnd all ground leads and ground paddle must be soldered to pcb rf/dc ground. 10 rfout multiplied output. ac coupled. no external dc blocks necessary. 14 vcc supply voltage 5v 0.5v. smt gaas hbt mmic x2 active frequency multiplier, 9.9 - 12.7 ghz output v04.0210 hmc369lp3 / 369lp3e
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 4 4 - 45 evaluation pcb item description j1, j2 pcb mount sma connector j3, j4 dc pin c1 0.01 f capacitor, 0603 pkg. u1 hmc369lp3 / HMC369LP3E x2 active multiplier pcb [2] 107710 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the nal application should be generated with proper rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 107712 [1] smt gaas hbt mmic x2 active frequency multiplier, 9.9 - 12.7 ghz output v04.0210 hmc369lp3 / 369lp3e
|
